A tile roof can look fine from the street and still be letting water in. One cracked tile, a slipped tile or a run of loose ridge capping is often all it takes to stain a ceiling after heavy rain.
Storm Roofing NSW repairs tile roofs for homes and commercial properties across Sydney. We find the actual source of the problem, not just patch over it, then fix it properly so it doesn't come back.
Cracked and broken roof tile replacement
Slipped and loose tile re-fixing
Ridge cap rebedding and repointing
Leaking tile roof repairs and leak detection
Valley iron replacement
Flashing repair and resealing
Storm and hail damage repairs
Emergency tarping and make-safe
Book a Tile Repair
Free quote. We call back within 1 hour, Monday to Saturday 7am–5pm.
Water stains, bubbling paint or drips on ceilings after rain
Cracked, broken or slipped tiles you can see from the ground
Ridge capping that is loose, uneven or has mortar falling out
Daylight showing through the tiles from inside the roof space
Damp insulation, timber or mould in the roof space
Rusted or blocked valley irons
A recent storm, hail or high winds over your area
What's Involved in a Tile Roof Repair
Find the source: we inspect the roof and trace the leak to where water is actually getting in, which is often not directly above the stain.
Replace broken tiles: cracked, broken and porous tiles are swapped out with the closest matching tile we can source, and slipped tiles are re-fixed.
Rebed and repoint ridge caps: loose ridge and hip caps are lifted, old cracked bedding is cleared, then the caps are re-bedded and re-pointed to seal and hold them.
Valleys and flashings: rusted valley irons are replaced and failed flashings around walls, chimneys and penetrations are repaired or resealed.
Clear quote first: you'll know what needs doing and what it costs before any work starts.
Repair or Replace?
Most tile roofs only need targeted repairs. If yours has widespread damage, tired concrete tiles or leaks that keep coming back in different places, we can also quote a tile-to-metal reroof in Colorbond so you can compare both options. For other leaks, flashings and storm damage, see our general roof repairs page, and if your gutters or fascia are also tired, see fascia, gutter and downpipe replacement.
Why Choose Storm Roofing NSW
Licensed NSW contractor, licence 466125C
Local roofer based at 14 Percy St, Gregory Hills
1-hour callback, Monday to Saturday 7am–5pm
We find the actual source of a leak, not just patch over it
Residential and commercial roofs
Emergency repairs, tarping and make-safe available
Reports and documentation for storm damage insurance claims
Yes. We replace cracked, broken and slipped tiles individually, using the closest matching tile we can source for your roof, so you don't need a full reroof to fix a few bad tiles.
Ridge caps are the capping tiles along the peaks and hips of a tile roof. They sit on a bed of mortar and are sealed with pointing. Over time the bedding cracks and comes loose, letting water in and allowing caps to move. Rebedding means lifting the caps and laying a fresh bed; repointing means applying new pointing over the top to seal and hold them.
Common causes are cracked or slipped tiles, cracked or missing ridge cap bedding and pointing, rusted or blocked valley irons, and failed flashings around chimneys, walls and penetrations. We trace the leak to its source before we repair it.
Yes. Emergency repairs, tarping and make-safe work are available. Call 0426 576 291.
If the tiles and battens are generally sound, a repair is usually the right call. If the roof has widespread damage or keeps leaking in different places, we can also quote a tile-to-metal reroof in Colorbond so you can compare.
Yes. We can provide detailed reports and documentation to support your insurance claim and work directly with assessors where needed.
We call back within 1 hour of your enquiry, Monday to Saturday 7am–5pm.